Heat transfer and pressure loss characteristics of a heat exchanger for recovering latent heat (effects of straight fin length and fin pitch on the heat transfer and pressure loss characteristics)

In recent years, the requirement for the reduction of energy consumption has been increasing to solve the problems of global warming and the shortage of petroleum resources. A latent heat recovery type heat exchanger is one of the effective methods for improving thermal efficiency by recovering latent heat. This paper describes the heat transfer and pressure loss characteristics of a latent heat recovery type heat exchanger having straight fins (fin length: 65 mm or 100 mm, fin pitch: 2.5 mm or 4 mm). These were clarified by measuring the exchange heat quantity, the pressure loss of the heat exchanger, and the heat transfer coefficient between the outer fin surface and gas. The effects of fin length and fin pitch on heat transfer and pressure loss characteristics were clarified. Furthermore, equations for predicting the heat transfer coefficient and pressure loss which are necessary for heat exchanger design were proposed. ©2007 Wiley Periodicals, Inc. Heat Trans Asian Res, 36(4): 230– 247, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20153 Copyright © 2004 Wiley Periodicals, Inc.     

UV Light-Generated Superhydrophilicity of a Titanium Surface Enhances the Transfer,Diffusion and Adsorption of Osteogenic Factors from a Collagen Sponge

It is a significant challenge for a titanium implant, which is a bio-inert material, to recruit osteogenic factors, such as osteoblasts, proteins and blood effectively when these are contained in a biomaterial. The objective of this study was to examine the effect of ultraviolet (UV)-treatment of titanium on surface wettability and the recruitment of osteogenic factors when they are contained in an atelocollagen sponge. UV treatment of a dental implant made of commercially pure titanium was performed with UV-light for 12 min immediately prior to the experiments. Superhydrophilicity on dental implant surfaces was generated with UV-treatment. The collagen sponge containing blood, osteoblasts, or albumin was directly placed on the dental implant. Untreated implants absorbed only a little blood from the collagen sponge, while the UV-treated implants absorbed blood rapidly and allowed it to spread widely, almost over the entire implant surface. Blood coverage was 3.5 times greater for the UV-treated implants (p < 0.001). Only 6% of the osteoblasts transferred from the collagen sponge to the untreated implants, whereas 16% of the osteoblasts transferred to the UV-treated implants (p < 0.001). In addition, a weight ratio between transferred albumin on the implant and measured albumin adsorbed on the implant was 17.3% in untreated implants and 38.5% in UV-treated implants (p < 0.05). These results indicated that UV treatment converts a titanium surface into a superhydrophilic and bio-active material, which could recruite osteogenic factors even when they were contained in a collagen sponge. The transfer and subsequent diffusion and adsorption efficacy of UV-treated titanium surfaces could be useful for bone formation when titanium surfaces and osteogenic factors are intervened with a biomaterial.     

Preparation of samples for proficiency testing of pesticide residue analysis in processed foods

To conduct proficiency testing for the analysis of pesticide residues in processed foods, fortified samples of retort curry and pancake were examined. In the case of retort curry, heating and mixing were necessary at the time of preparation to provide a homogenous analytical sample. A mixture of 4 carbamates and 11 organophosphorus pesticides was spiked and 14 of them showed consistent results in the samples. In the case of pancake, 10 kinds of pesticides were added to the pastry. The prepared pastry was them cooked. The relative concentrations of most of the pesticides in the pancake were not affected and all the pesticides showed consistent results in the samples. These results showed that the two tested samples were suitable for proficiency testing.     

A survey on communication and data management issues in mobile sensor networks

Wireless sensor networks (WSNs) which is proposed in the late 1990s have received unprecedented attention, because of their exciting potential applications in military, industrial, and civilian areas (e.g., environmental and habitat monitoring). Although WSNs have become more and more prospective in human life with the development of hardware and communication technologies, there are some natural limitations of WSNs (e.g., network connectivity, network lifetime) due to the static network style in WSNs. Moreover, more and more application scenarios require the sensors in WSNs to be mobile rather than static so as to make traditional applications in WSNs become smarter and enable some new applications. All this induce the mobile wireless sensor networks (MWSNs) which can greatly promote the development and application of WSNs. However, to the best of our knowledge, there is not a comprehensive survey about the communication and data management issues in MWSNs. In this paper,focusing on researching the communication issues and data management issues in MWSNs, we discuss different research methods regarding communication and data management in MWSNs and propose some further open research areas in MWSNs.Copyright © 2011 John Wiley & Sons, Ltd.     

Cu behaviors and effects of mine drainage in Kosaka River,Hokuroku mining district,Northeast Japan

Focusing on the origin of the heavy metal, this study aims to build an imputed method to estimate the heavy metal content in river water by making a distinction between the heavy metal of natural origins and that caused by human activities. Supported by GIS, Kosaka watershed within the Hokuroku basin was divided into several sub-watershed polygons and the outflows of water and Cu were calculated for each polygon. Compared with the natural origin, the dominant Cu emissions affected the river water more significantly in local. Based on the mass balance closure, the heavy metal content of Cu in the Kosaka River was estimated by the conflux accumulation of tributaries and mine drainages. The estimated Cu concentrations were checked by comparing with the actually measured values at monitoring points along the Kosaka River and the results are coincidence with each other in general. It is revealed that the mainstream water quality could be estimated by seizing the water quality of upstream tributaries and human drainages.     

Physicochemical properties of monosodium glutamate-compounded tapioca starch exceeds those of simple heat-moisture treated starch

Monosodium glutamate (GluNa)-compounded starch was prepared by heat-moisture treating a mixture of tapioca starch and GluNa. GluNa-compounded starch exhibited a higher gelatinization temperature and reduced swelling and solubility, essentially lower hardness of the granule center, and paste viscosity than those of the heat-moisture treated tapioca starch and the untreated starch. However, its appearance, unit chain length distribution, and α-amylase digestibility were similar to those of the heat-moisture treated tapioca. It is thus concluded that GluNa compounding is useful for providing a unique type of starch that possesses a less swollen and viscous texture than that produced with simple heat-moisture treatment.     

Study on heat transfer characteristics of reservoir embedded loop heat pipe (1st report,Influence of evaporator orientation against gravity and charged liquid weight on heat transfer characteristics)

High‐powered satellites need larger heat rejection areas. A deployable radiator is one of the key technologies for a high‐powered satellite bus. A Reservoir Embedded Loop Heat Pipe (RELHP) is a two‐phase heat transfer device that constitutes a deployable radiator. RELHP has an evaporator core which is used as a liquid reservoir to enhance operational reliability. This paper presents the heat transport characteristics of a RELHP under changing evaporator orientation against gravity and charged ammonia weight by experiment and calculation. Liquid slug position in the reservoir has a great influence on heat transport characteristics, caused by changing heat transfer coefficients between returned liquid into the evaporator and vapor in the reservoir. © 2007 Wiley Periodicals, Inc. Heat Trans Asian Res, 36(3): 143– 157, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20150     

Photocarrier generation in organic thin-film solar cells with an organic heterojunction

Photocurrent–voltage characteristics for organic solar cells with a heterojunction formed between copper phthalocyanine and a perylene derivative (or C₆₀) were studied. The photocurrent was observed under both reverse and forward biases. From the analysis of the photocurrent action spectra, the origin of the reverse photocurrent was attributed to the excitons formed in both the organic layers, whereas that of the forward photocurrent was attributed to the excitons formed in the perylene derivative (or C₆₀) layer. The photocurrent density under reverse bias increased at higher temperatures, suggesting that the charge recombination possibility was lowered at higher temperatures. On the basis of the time responses of the photocurrents observed after pulsed photoirradiation, the charge separation and transport processes are discussed.     

Thermodynamic analysis for the controllability of elements in the recycling process of metals

This study presents the results of chemical thermodynamic analysis on the distribution of elements in the smelting process of metallic materials to examine the controllability of impurities in the pyrometallurgical technique. The results of the present work can give an answer against the frequently given question; "Which impurity element can be removable in metallurgical process?" or "How far can the impurity level be controlled?". The proposed method was applied to estimate the distribution of 29 elements for a copper converter and 26 elements for a steel-making process and shows the distribution tendency of elements among the gas, slag, and metal phases as well as clarifying which metals can be recovered or removed from secondary resources in metallurgical processes. The effects of temperature, oxygen partial pressure, and slag composition on the distribution ratio of elements were also evaluated, and the removal limit or controllability of impurity in these two processes was presented. This study results in thermodynamic features of various elements in the pyrometallurgical process and also shows, even by varying process parameters such as temperature and oxygen partial pressure, no drastic improvement of removal efficiency should be expected, except for lead and tin in copper.     

Purification and characterization of enzyme responsible for N-myristoylation of octapeptide in aqueous solution without ATP and coenzyme a from Pseudomonas aeruginosa

The enzyme that catalyzes N-acyl linkage between myristic acid and the NH(2)-terminal glycine residue of the octapeptide Gly-Asn-Ala-Ala-Ala-Ala-Arg-Arg-NH(2) in aqueous solution without ATP and coenzyme A was found in Pseudomonas aeruginosa. The enzyme was purified from cell-free crude extract using DEAE-Cellulose, Sephadex G-200, CM-Sephadex C-50, and hydroxyapatite column chromatographies, and then purified approximately 1900-fold with about 1.5% recovery of enzyme activity from the crude extract. Finally, the purified enzyme showed a main band on SDS polyacrylamide gel electrophoresis after staining with Coomassie Brilliant Blue. The band corresponded to a molecular mass of approximately 60 kDa. The K(m)s of the purified enzyme for the substrate myristic acid and the octapeptide were 0.36 and 2.6 mM, respectively. When myristoyl-CoA instead of myristic acid was used as the substrate for the enzyme reaction, myristoyl octapeptide could be synthesized as observed in the case of myristic acid. The K(m) of myristoyl-CoA was 0.17 mM.